7 Common Plumbing Problems

7 Common Plumbing Problems and Fixes:

Many homes, even brand new homes, can have plumbing problems. However, instead of getting a plumber involved, it is possible to fix many of these plumbing problems without professional help. Here are seven common plumbing problems, as well as how to fix them:
Lack of hot water Plumbing problems related to water temperature always lead to your water heater. You might be able to turn up the thermostat on your water heater. However, your water heater may be clogged with calcium deposits, which limits the amount of hot water it can produce. In this event, it is possible to remove these deposits from most water heaters. Replacing the heating elements is can also restore hot water to your home. Another possibility is that the water heater is beyond repair and must be replaced.
Leaky faucet A leaky faucet is one of the easiest plumbing problems to fix. The source of the leak is usually a bad seal in the faucet handle. Simply disassemble the faucet, replace the worn out part (usually a rubber gasket), and put it back together.
Clogged Toilet A clogged toilet is among the list of common but easily solved, plumbing problems. Most clogged toilets can be fixed by plunging. However, if plunging the toilet does not alleviate the clog, serious plumbing problems could be the cause.
Toilet Does Not Flush Everything If your toilet is not clogged, but does not flush everything, there may not be enough water to carry everything away. In the tank behind the toilet bowl, there is a float that controls how much water is used. Making the float sit higher so that more water is used should cure plumbing problems related to a weak flush.
Slow Draining Sinks Most home remedies for slow draining sinks involve pouring some kind of solution down the drain to loosen deposits that slow the flow of water. Remedies for these plumbing problems include solutions from store bought drain cleaners to bleach or hot vinegar. Another way to solve and prevent these types of plumbing problems is to fill all the sinks with water and drain them all at once. The pressure caused by this volume of water can help push deposits out of your pipes.
Pipes under the Sink Leak Before you tackle these plumbing problems, make sure the fixture with the leak is not clogged. If there is no clog, find the source of the leak. In the event that the leak is coming from the juncture of two pipes, try to tighten it. If this does not work, take the leaky section apart and check for stripped or damaged threads. Replacing a damaged part may be necessary, but wrapping the threads with Teflon tape will eliminate most leaky joints. However, if there is a crack in a pipe or appliance component, replacement is usually the only option.
Toilet Leaks from the Base A toilet leak, if it is in fact coming from the base, can usually be fixed by replacing the wax ring that fits between the toilet and the floor. This can be relatively simply to do, unless the floor is uneven or something else prevents solid contact between the toilet and the wax ring.
Dealing with Common Plumbing Problems Although fixing plumbing problems is not usually fun, you can save yourself a lot of money by not calling a plumber. Even if you do decide to get a plumber involved, diagnosing the problem can shorten the process and ensure that a plumber does not try to fix anything that is not broken.
Written by Henry James. For information on finding a licensed and experienced Melbourne plumber, please visit http://www.melbourneplumber.com.au/
Article Source: http://EzineArticles.com/?expert=Henry_James